The design and functionality of the SIMATIC PM 1507 single-phase load power supply (PM = power module) with automatic range selection of the input voltage makes it an optimal match to the SIMATIC S7-1500 PLC. It supplies the S7-1500 system components such as CPU, system power supply (PS), I/O circuits of the input and output modules and, if necessary, the sensors and actuators with 24 V DC.
SIPLUS extreme products are based on Siemens standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme specific information was added.
SIPLUS S7-1500 PM 1507 | ||
Article No. | 6AG1332-4BA00-7AA0 | 6AG1333-4BA00-7AA0 |
Article number based on | 6EP1332-4BA00 | 6EP1333-4BA00 |
Ambient temperature range | -40 ... +70 °C | |
Conformal coating | Coating of the printed circuit boards and the electronic components | |
Technical specifications | The technical specifications of the standard product apply, except for the ambient conditions. | |
Ambient conditions | ||
Extended range of environmental conditions | ||
| Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // | |
Relative humidity | ||
| 100 %; RH incl. bedewing/frost (no commissioning in bedewed state) | |
Resistance | ||
| Yes; Class 3B2 mold and fungal spores (except fauna); the supplied plug covers must remain in place on the unused interfaces during operation. | |
| Yes; Class 3C4 (RH < 75%) incl. salt spray in accordance with EN 60068-2-52 (severity 3); the supplied plug covers must remain in place on the unused interfaces during operation. | |
| Yes; Class 3S4 incl. sand, dust; the supplied plug covers must remain in place on unused interfaces during operation. |