Intelligent Operator Panel IOP
The Intelligent Operator Panel IOP is a very user-friendly and powerful operator panel for the SINAMICS G120, SINAMICS G120C, SINAMICS G120P, SINAMICS G110D, SINAMICS G120D, SINAMICS G110M and SINAMICS S110 standard drives.
The IOP supports both entry-level personnel and drive experts. Thanks to the large plain text display, the menu-based operation and the application wizards, it is easy to commission standard drives. A drive can be essentially commissioned without having to use a printed parameter list – as the parameters are displayed in plain text, and explanatory help texts and the parameter filtering function are provided.
Application wizards interactively guide you when commissioning important applications such as conveyor technology, pumps, fans and compressors. There is a basic commissioning wizard for general commissioning.
The drives are easily controlled manually using directly assigned buttons and the navigation wheel. The IOP has a dedicated switchover button to switch from automatic to manual mode.
The inverter can be diagnosed in a user-friendly fashion using the plain text display of faults and alarms. Help texts can be obtained by pressing the INFO button.
Up to 2 process values can be displayed graphically or numerically on the status screen/status display. Process values can also be displayed in technological units.
The IOP supports standard commissioning of identical drives. For this purpose, a parameter list can be copied from an inverter into the IOP and downloaded into other drive units of the same type as required.
The IOP is available in 2 versions with the following languages 1):
The IOP can be installed in control cabinet doors using the optionally available door mounting kit (not possible in conjunction with the PM230 Power Module in degree of protection IP55).
The operating temperature of the IOP is 0 to 50 °C (32 to 122 °F).
IOP Handheld
A handheld version 2) of the IOP can be ordered for mobile use. In addition to the IOP, this includes a housing with rechargeable batteries, charging unit and RS232 connecting cable. The charging unit is supplied with connector adapters for Europe, the US and UK. When the batteries are fully charged, the operating time is up to 8 hours.
The IOP can be updated and expanded using the integrated USB interface.
Data to support future drive systems can be transferred from the PC to the IOP. Further, the USB interface allows user languages and wizards that will become available in the future to be subsequently downloaded and the firmware to be updated for the IOP 1).
The IOP is supplied with power via the USB interface during an update.
1) Further information is available at
http://support.automation.siemens.com/WW/view/en/67273266
2) The scope of supply of the IOP Handheld includes the IOP with Article No. 6SL3255-0AA00-4JA1.