Меню

Главная Каталог Документация Новости Оплата Доставка О компании Контакты

PM230 Power Modules

ID каталога
Группа продукта
Страна происхождения
6SL3210-1NE12-2UL1
6SL3210-1NE12-2UL1
Заказной номер: 6SL3210-1NE12-2UL1
SINAMICS G120,СИЛОВОЙ МОДУЛЬ PM230 БЕЗ ФИЛЬТРА СТЕПЕНЬ ЗАЩИТЫ IP20, 3AC380-480В +10/-10% 47-63ГЦ ВЫХОДНАЯ МОЩНОСТЬ НИЗКОЙ ПЕРЕГРУЗКИ: 0,75КВТ FOR 150% 3S,110% 57S, 100% 240S, ТЕМПЕРАТУРА ОКР. СРЕДЫ ОТ 0 ДО +40 ГРАД. C(LO) 196 X 73 X 165 (ВXШXГ), FSA БЕЗ УПРАВЛЯЮЩЕГО МОДУЛЯ И ПАНЕЛИ ОПЕРАТОРА ОПТИМИЗИРОВАНН ДЛЯ CU240B/E-2 И CU230P-2 МИКРОПРОГРАММНОЕ ПО V4.4 ПРИМЕЧАНИЕ: PM230 НЕ ПОДДЕРЖИВАЕТ SAFETY
6SL3223-0DE22-2BA1
6SL3223-0DE22-2BA1
Заказной номер: 6SL3223-0DE22-2BA1
SINAMICS G120P POWER MODULE PM230 WITH BUILT IN CL. B FILTER PROTECTION IP55 / UL TYPE12 3AC380-480V +10/-10% 47-63HZ OUTPUT LOW OVERLOAD: 2,2KW FOR 150% 3S,110% 57S,100% 240S AMBIE. TEMP -10 TO+40 DEG C(LO) 460 X 154 X 249 (HXBXT), FSA WITHOUT CONTROL UNIT AND PANEL APPROVED FOR CU230P-2 FIRMWARE-VERSION V4.3.2
6SL3210-1NE15-8UL1
6SL3210-1NE15-8UL1
Заказной номер: 6SL3210-1NE15-8UL1
SINAMICS G120,СИЛОВОЙ МОДУЛЬ PM230 БЕЗ ФИЛЬТРА СТЕПЕНЬ ЗАЩИТЫ IP20 3AC380-480В +10/-10% 47-63ГЦ ВЫХОДНАЯ МОЩНОСТЬ НИЗКОЙ ПЕРЕГРУЗКИ: 2,2КВТ ДЛЯ 150% 3S,110% 57S, 100% 240S, ТЕМПЕРАТУРА ОКР. СРЕДЫ ОТ 0 ДО +40 ГРАД. C(LO) 196 X 73 X 165 (ВXШXГ), FSA БЕЗ УПРАВЛЯЮЩЕГО МОДУЛЯ И ПАНЕЛИ ОПЕРАТОРА ОПТИМИЗИРОВАНН ДЛЯ CU240B/E-2 И CU230P-2 МИКРОПРОГРАММНОЕ ПО V4.4 ПРИМЕЧАНИЕ: PM230 НЕ ПОДДЕРЖИВАЕТ SAFETY
6SL3223-0DE34-5BA0
6SL3223-0DE34-5BA0
Заказной номер: 6SL3223-0DE34-5BA0
SINAMICS G120P СИЛОВОЙ МОДУЛЬ PM230 СО ВСТРОЕННЫМ ФИЛЬТРОМ КЛАССА B, КЛАСС ЗАЩИТЫ IP55 / ТИП UL 12 3-ФАЗН.380-480 В +10/-10% 47-63 ГЦ ВЫХОД НИЗКИЙ УРОВЕНЬ ПЕРЕГРУЗКИ: 45 КВТ ПРИ 150% 3С,110% 57С,100% 240С ТЕМП. ОКР. СРЕДЫ: ОТ 0 ДО +40 ГРАД. C(LO) 751 X 320 X 329 (HXBXT), FSE БЕЗ УПРАВЛЯЮЩЕГО МОДУЛЯ И ПАНЕЛИ ОПЕРАТОРА ОПТИМИЗИРОВАН ДЛЯ CU230P-2 МИКРОПРОГРАММНОЕ ПО V4.3.2
6SL3223-0DE27-5BA1
6SL3223-0DE27-5BA1
Заказной номер: 6SL3223-0DE27-5BA1
SINAMICS G120P POWER MODULE PM230 WITH BUILT IN CL. B FILTER PROTECTION IP55 / UL TYPE12 3AC380-480V +10/-10% 47-63HZ OUTPUT LOW OVERLOAD: 7,5KW FOR 150% 3S,110% 57S,100% 240S AMBIE. TEMP -10 TO+40 DEG C(LO) 540 X 180 X 249 (HXBXT), FSB WITHOUT CONTROL UNIT AND PANEL APPROVED FOR CU230P-2 FIRMWARE-VERSION V4.3.2
1
2
...
17

Обзор

PM230 Power Modules, degree of protection IP20, frame sizes FSA to FSF (with Control Unit and operator panel)

 

PM230 Power Modules, degree of protection IP20, Push Through variant, frame sizes FSA to FSC (with Control Unit and operator panel)

 

PM230 Power Modules, degree of protection IP54, frame sizes FSA to FSF (with operator panel)

PM230 Power Modules are designed for applications involving pumps, fans and compressors with a quadratic characteristic. They do not have an integrated braking chopper (single-quadrant applications).

The PM230 Power Module only generates low line harmonics and apparent power losses. In addition to the energy-related advantages, environmental stressing is also reduced.

  • Line harmonics are reduced significantly.
    • The limit values of EN 61000‑3‑2, EN 61000‑3‑12 or IEC 61000‑3‑4 are maintained for RSCE > 250.
      RSCE is the short-circuit power ratio Ssc line/Sinverter acc. to EN 61000‑3‑2, EN 61000‑3‑12 or EN 61000‑3‑4 and is identical to RSC acc. to IEC 60146‑1‑1 in the case of three-phase devices.
    • Additional components such as line reactors are not required and it is not permissible to use them. As a consequence, low envelope dimensions are obtained for space-saving designs.
  • The active power component is very high, i.e. the devices consume less current from the supply for the same drive power. As a consequence, smaller supply cables can be used.

Frame sizes FSA to FSF of the PM230 Power Module in degree of protection IP55/UL Type 12 are available with integrated line filter class A for Category C2 installations in accordance with EN 61800‑3. The PM230 Power Modules with integrated filter class B that are available as an alternative also comply with the conducted interference requirements for Category C1 in accordance with EN 61800‑3.

Frame sizes FSA to FSF of the PM230 Power Module in degree of protection IP20 are available with integrated line filter class A for Category C2 installations in accordance with EN 61800‑3, or without an integrated line filter.

Frame sizes FSA to FSC of the PM230 Power Module in degree of protection IP20 Push Through variant are available with integrated line filter class A for Category C2 installations in accordance with EN 61800‑3, or without an integrated line filter.

In order to maintain EMC categories C2 (line filter A) or C1 table 14 (line filter B, conducted), the permissible shielded cable length between the inverter and motor is limited to max. 25 m (82 ft).

The permissible cable lengths between inverter and motor are limited. Longer cables can be used if output reactors are connected for PM230 (see load-side power components).

The line system configurations that are supported are symmetrical systems with grounded neutral point.

PM230 Power Modules do not support Control Units with Safety Integrated. Safety functions can be implemented by means of external switching devices.

Note:

Shield plates and shield connection kits are available. These can be used in the wiring installation for the Control Units and Power Modules to ensure that it complies with EMC guidelines.
For further information, see Shield connection kits and Shield plates for Control Units and Power Modules in section Supplementary system components.

PM230 Power Modules