Recommended line-side power components
Обзор
The following table lists recommendations for additional line-side components, such as fuses and circuit breakers.
Note for use in compliance with IEC standards:
3NA3 type fuses and 3RV type circuit breakers are recommended for European countries. The values in the table take into account the overload capability of the inverter.
Note for use in compliance with UL regulations:
Fuses for use in North America must be UL-certified, Class J fuses with a rated voltage of 600 V AC.
Short Circuit Current Rating (SCCR)
according to UL
Applies to industrial control panel installations according to NEC Article 409 or UL 508A.
- PM240M: 40 kA
Additional information about the listed fuses and circuit breakers can be found in Catalogs LV 10, IC 10 and IC 10 AO.
Individual protection
Rated power | SINAMICS G110M | IEC-compliant | UL/cUL-compliant | |||||
|---|---|---|---|---|---|---|---|---|
|
| Fuse | Circuit breaker | Fuse type | ||||
|
|
|
| Current |
|
|
| Current |
kW | hp | Type | Frame size | A | Article No. | Article No. | Class | A |
380 ... 480 V 3 AC | ||||||||
0.37 | 0.5 | 6SL3517-1BE11-3AM0 | FSA | 10 | 3NA3803 | 3RV2011-1JA10 | J | 10 |
0.75 | 1 | 6SL3517-1BE12-3AM0 | FSA | 10 | 3NA3803 | 3RV2011-1JA10 | J | 10 |
1.1 | 1.5 | 6SL3517-1BE13-3AM0 | FSA | 10 | 3NA3803 | 3RV2011-1JA10 | J | 10 |
1.5 | 2 | 6SL3517-1BE14-3AM0 | FSA | 10 | 3NA3803 | 3RV2011-1JA10 | J | 10 |
2.2 | 3 | 6SL3517-1BE16-3AM0 | FSB | 20 | 3NA3807 | 3RV2021-4BA10 | J | 20 |
3 | 4 | 6SL3517-1BE17-7AM0 | FSB | 20 | 3NA3807 | 3RV2021-4BA10 | J | 20 |
4 | 5 | 6SL3517-1BE21-0AM0 | FSB | 20 | 3NA3807 | 3RV2021-4BA10 | J | 20 |
The SINAMICS G110M system supports an inverter loop-through of line current to several inverters connected in series.
Further information can be found in the operating instructions at
http://www.siemens.com/sinamics-g110m/documentation
Group protection (installation on power bus)
For installations with several inverters, the inverters are normally supplied from a 400 V power bus.
Further information can be found in the operating instructions at
http://www.siemens.com/sinamics-g110m/documentation
