Заказать звонок
Меню

Главная Каталог Документация Новости Оплата Доставка О компании Контакты

SIPLUS IM151-7 CPU

ID каталога
Группа продукта
Страна происхождения
6ES5710-8MA31
6ES5710-8MA31
Заказной номер: 6ES5710-8MA31
SIMATIC S5, СТАНДАРТНАЯ 35MM ПРОФИЛЬНАЯ ШИНА, ДЛИНА 830MM, ДЛЯ 900MM ШКАФОВ УПРАВЛЕНИЯ
6ES5710-8MA41
6ES5710-8MA41
Заказной номер: 6ES5710-8MA41
SIMATIC S5, СТАНДАРТНАЯ 35MM ПРОФИЛЬНАЯ ШИНА, ДЛИНА 2M
6ES5710-8MA21
6ES5710-8MA21
Заказной номер: 6ES5710-8MA21
SIMATIC S5, СТАНДАРТНАЯ 35MM ПРОФИЛЬНАЯ ШИНА, ДЛИНА 530MM, ДЛЯ 600MM ШКАФОВ УПРАВЛЕНИЯ
6ES5710-8MA11
6ES5710-8MA11
Заказной номер: 6ES5710-8MA11
SIMATIC S5, СТАНДАРТНАЯ 35MM ПРОФИЛЬНАЯ ШИНА, ДЛИНА 483MM, ДЛЯ 19 СТОЕК УПРАВЛЕНИЯ
6ES7792-0AA00-0XA0
6ES7792-0AA00-0XA0
Заказной номер: 6ES7792-0AA00-0XA0
SIMATIC PG, ВНЕШНИЙ ПРОГРАММАТОР С USB ИНТЕРФЕЙСОМ, НАПРЯЖЕНИЕ ПИТАНИЯ ~115/220В
1
2

Обзор

  • Interface module for SIMATIC ET 200S with integrated S7-CPU 314
  • For high-performance control solutions in ET 200S
  • Increase of the availability of systems and machines
  • Programming via PROFIBUS DP
  • Compact SIMATIC micro memory card (MMC)
  • Integrated 12 Mbit/s PROFIBUS DP slave/MPI interface in Cu version
  • Integrated CPU based on the CPU S7-314
  • IM 151-7 CPU FO available
  • Failsafe IM 151-7 F-CPU PROFIsafe available
  • Alternatively, as IM 151-8 (F) PN/DP CPU with PROFINET interface

Micro Memory Card required for operation of CPU.

Note:

SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.

 

SIPLUS IM151-7 CPU

Article No.

6AG1151-7AA21-2AB0

BasedOn Article No.

6ES7151-7AA21-0AB0

Ambient temperature range

-25 °C … +70 °C

Conformal coating

Coating of the printed circuit boards and the electronic components

Technical data

The technical data of the standard product applies, except for the ambient conditions.



Ambient conditions

Relative humidity

100%, condensation/frost permitted. No commissioning in bedewed state.

Biologically active substances, compliance with EN 60721-3-3

Class 3B2 mold and fungal spores (excluding fauna). The supplied plug covers must remain in place over the unused interfaces during operation!

Chemically active substances, compliance with EN 60721-3-3

Class 3C4 incl. salt spray in accordance with EN60068-2-52 (degree of severity 3). The supplied plug covers must remain in place over the unused interfaces during operation!

Mechanically active substances, compliance with EN 60721-3-3

Class 3S4 incl. sand, dust. The supplied plug covers must remain in place over the unused interfaces during operation!

Air pressure (depending on the highest positive temperature range specified)

1 080...795 hPa (-1 000 ... +2 000 m)

See ambient temperature range

795...658 hPa (+2 000 ... +3 500m)

Derating 10 K
658 ... 540 hPa (+3 500 ... +5 000 m) derating 20 K



For technical documentation on SIPLUS, see:

http://www.siemens.de/siplus-extreme

SIPLUS IM151-7 CPU