SIPLUS S7-400 CP 443-1
Обзор
- Connection of SIMATIC S7-400 to Industrial Ethernet
- 2 x RJ45 interface for 10/100 Mbit/s full/half-duplex connection with auto-sensing/auto-negotiation and auto-crossover function
- Integrated real-time switch ERTEC with two ports
- Multi-protocol operation for ISO, TCP/IP, UDP and PROFINET IO protocols
- Adjustable Keep Alive function
- Communications services:
- Open communication (ISO, TCP/IP, and UDP)
- PROFINET IO Controller with real-time properties RT and IRT
- PG/OP communication: Cross-network by means of S7 routing
- S7 communication
- Media redundancy (MRP);
the CP supports the media redundancy procedure MRP within an Ethernet network with ring topology. - Multicast for UDP
- Access protection via configurable access list
- Support for fail-safe programmable controllers together with SIMATIC S7-400 CPU 416F-3PN/DP
- Module replacement without PG
- Operation in the SIMATIC H system for redundant S7-communication
- Configuration with STEP 7
- Diagnostics possibilities in STEP 7 and via web browser
- Automatic CPU-clock setting via Industrial Ethernet with NTP or SIMATIC procedure
- Integration of network management systems via SNMP (MIB II diagnostic information)
Note:
SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme specific information was added.
SIPLUS CP 443-1 | |
Article No. | 6AG1 443-1EX20-4XE0 |
Order number based on | 6GK7 443-1EX20-0XE0 |
Ambient temperature range | 0 ... +60 °C |
Conformal coating | Coating of the printed circuit boards and the electronic components |
Technical data | The technical data of the standard product applies, except for the ambient conditions |
Ambient conditions | |
Relative humidity | 100%, condensation/frost permitted. No commissioning in bedewed state. |
Biologically active substances, compliance with EN 60721-3-3 | Class 3B2 mold spores, fungal spores (excluding fauna). The supplied plug covers must remain in place over the unused interfaces during operation! |
Chemically active substances, compliance with EN 60721-3-3 | Class 3C4 incl. salt spray in accordance with EN60068-2-52 (degree of severity 3). The supplied plug covers must remain in place over the unused interfaces during operation! |
Mechanically active substances, compliance with EN 60721-3-3 | Class 3S4 incl. sand, dust. The supplied plug covers must remain in place over the unused interfaces during operation! |
Air pressure (depending on the highest positive temperature range specified) | 1080 ... 795 hPa (-1000 ... +2000 m) 795 ... 658 hPa (+2000 ... +3500 m) 658 ... 540 hPa (+3500 ... +5000 m) |
Technical documentation on SIPLUS can be found here:
http://www.siemens.de/siplus-extreme
