Меню

Главная Каталог Документация Новости Оплата Доставка О компании Контакты

SIPLUS S7-400 CP 443-5 Extended

Вышел из производства
ID каталога
Группа продукта
Страна происхождения
6ES7972-0BA11-0XA0
6ES7972-0BA11-0XA0
Заказной номер: 6ES7972-0BA11-0XA0
Продукт больше не поставляется. Заменить продукт на 6ES7972-0BA12-0XA0
SIMATIC DP, BUS CONNECTOR FOR PROFIBUS UP TO 12 MBIT/S 90 DEGREE ANGLE OUTGOING CABLE, (W X H X D): 15,8 X 54 X 34 MM TERMINAT. RESIST. WITH ISOLAT. FUNCTION, WITHOUT PG SOCKET
6ES7972-0BA51-0XA0
6ES7972-0BA51-0XA0
Заказной номер: 6ES7972-0BA51-0XA0
Продукт больше не поставляется. Заменить продукт на 6ES7972-0BA52-0XA0
SIMATIC DP,BUS CONNECTOR FOR PROFIBUS UP TO 12 MBIT/S 90 DEGREE ANGLE OUTGOING CABLE, 15,8 X 59 X 35,6 MM (WXHXD), IPCD TECHOLOGY FAST CONNECT, WITHOUT PG SOCKET
6ES7972-0BA10-0XA0
6ES7972-0BA10-0XA0
Заказной номер: 6ES7972-0BA10-0XA0
Продукт больше не поставляется. Заменить продукт на 6ES7972-0BA12-0XA0
SIMATIC S7, BUS CONNECTOR FOR PROFIBUS DP, FLAT DESIGN ANTHRACITE, W/O PG CONNECTION SOCKET, FOR APPLICATIONS WITH MAX. 12 MBAUD
6ES5762-1AA51
6ES5762-1AA51
Заказной номер: 6ES5762-1AA51
Продукт больше не поставляется. Заменить продукт на 6ES7972-0BB12-0XA0
6ES7972-0BA52-0XA0
6ES7972-0BA52-0XA0
Заказной номер: 6ES7972-0BA52-0XA0
SIMATIC DP, ШИННЫЙ CОЕДИНИТЕЛЬ ДЛЯ ПОДКЛЮЧЕНИЯ К СЕТЯМ PROFIBUS ДО 12 МБИТ/С, ОТВОД КАБЕЛЯ ПОД УГЛОМ 90 ГРАДУСОВ, 15,8 X 59 X 35,6 MM (ШXВXГ), IPCD, ТЕХНОЛОГИЯ FAST CONNECT, БЕЗ РАЗЪЁМА ДЛЯ ПОДКЛЮЧЕНИЯ ПРОГРАММАТОРА
1
2
...
4

Обзор

  • DP-V1 master connection of the S7-400 to PROFIBUS
  • For setting up additional PROFIBUS DP lines
  • Communications services:
    • PROFIBUS DP
    • PG/OP communication
    • S7 communication
    • S5-compatible communication (SEND/RECEIVE)
  • Clock synchronization
  • Easy programming and configuration over PROFIBUS
  • Cross-network programming device communication through S7 routing
  • Can be easily integrated into the SIMATIC S7-400 system
  • Module replacement without PG
  • SIMATIC H system operation for redundant S7 communication or DP master communication
  • Data record routing (PROFIBUS DP)
  • Adding or modifying distributed I/O during operation
Note:

SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.

SIPLUS CP 443-5-Extended

 

Article No.

6AG1 443-5DX05-4XE0

Order No. based on

6GK7 443-5DX05-0XE0

Ambient temperature range

0 ... +60 °C

Conformal coating

Coating of the printed circuit boards and the electronic components

Technical specifications

The technical specifications of the standard product apply, except for the ambient conditions

Ambient conditions

Relative humidity

100%, condensation/frost permitted. No commissioning in bedewed state.

Biologically active substances, compliance with EN 60721-3-3

Class 3B2 mold and fungal spores (excluding fauna). The supplied plug covers must remain in place over the unused interfaces during operation!

Chemically active substances, compliance with EN 60721-3-3

Class 3C4 incl. salt spray in accordance with EN60068-2-52 (degree of severity 3). The supplied plug covers must remain in place over the unused interfaces during operation!

Mechanically active substances, compliance with EN 60721-3-3

Class 3S4 incl. sand, dust. The supplied plug covers must remain in place over the unused interfaces during operation!

Air pressure (depending on the highest positive temperature range specified)

1080 ... 795 hPa (-1000 ... +2000 m)
see ambient temperature range

795 ... 658 hPa (+2000 ... +3500 m)
derating 10 K

658 ... 540 hPa (+3500 ... +5000 m)
derating 20 K



Technical documentation on SIPLUS can be found here:
http://www.siemens.de/siplus-extreme

SIPLUS S7-400 CP 443-5 Extended