CBE20 Communication Board
6SL3055-0AA00-2EB0
Заказной номер: 6SL3055-0AA00-2EB0
SINAMICS S120 CBE20 PROFINET-МОДУЛЬ ДЛЯ ПОДКЛЮЧЕНИЯ К СЕТИ PROFINET IO С 4 ПОРТАМИ RJ45 С КОММУТАЦИОННОЙ ФУНКЦИЕЙ
6GK1901-1BB30-0AB0
Заказной номер: 6GK1901-1BB30-0AB0
SIMATIC NET IE FC RJ45 PLUG 145, RJ45-ВИЛКА С МЕТАЛЛИЧЕСКИМ КОРПУСОМ ДЛЯ СИСТЕМ БЫСТРОГО ПОДКЛЮЧЕНИЯ, ВЫХОД КАБЕЛЯ 145 ГРАД., УПАКОВКА ИЗ 10 ШТУК
6GK1901-1BB30-0AA0
Заказной номер: 6GK1901-1BB30-0AA0
SIMATIC NET IE FC RJ45 PLUG 145 RJ45, РОЗЕТОЧНЫЙ РАЗЪЁМ ДЛЯ ПОДКЛЮЧЕНИЯ К INDUSTRIAL ETHERNET В ВЫСОКОПРОЧНОМ МЕТАЛЛИЧЕСКИМ КОРПУСЕ, МЕТОД ПОКЛЮЧЕНИЯ - БЫТРЫЙ МОНТАЖ (FC) , ОТВОД КАБЕЛЯ ПОД УГЛОМ 145 ГРАД., 1 ШТ. В УПАКОВКЕ
6XV1870-2B
Заказной номер: 6XV1870-2B
SIMATIC NET, ETHERNET FC ИНСТАЛЯЦИОННЫЙ ГИБКИЙ КАБЕЛЬ (PROFINET ТИП B) 4-x ЖИЛЬНЫЙ ЭКРАНИРОВАННЫЙ; КАТЕГОРИИ 5 ПРОДАЁТСЯ В МЕТРАХ, МАКС. ПОСТАВКА 1000 M, МИН. ЗАКАЗНАЯ ДЛИНА: 20 M
6XV1870-2D
Заказной номер: 6XV1870-2D
SIMATIC NET, ETHERNET FC ИНСТАЛЯЦИОННЫЙ КАБЕЛЬ ДЛЯ ПЕРЕДВИЖНЫХ МЕХАНИЗМОВ С ГУСЕНИЧНОЙ ЛЕНТОЙ (PROFINET ТИП С) С 4-x ЖИЛЬНЫЙ ЭКРАНИРОВАННЫЙ; КАТЕГОРИИ 5 ПРОДАЁТСЯ В МЕТРАХ (1 МИЛЛИОН ЦИКЛОВ), МАКС. ПОСТАВКА 1000 M, МИН. ЗАКАЗНАЯ ДЛИНА: 20 M
Обзор
The CBE20 Communication Board is required, if
- a SINAMICS S120 or SINAMIC S150 converter, equipped with a CU320-2 DP (PROFIBUS) Control Unit, is to be connected to a PROFINET-IO network
- SINAMICS Link is to be used to directly exchange data between several CU320-2 DP (PROFIBUS) or CU320-2 PN (PROFINET) Control Units without using a higher-level control system.
With the CBE20 Communication Board, SINAMICS S120 or SINAMICS S150 is a PROFINET IO device in the sense of PROFINET and can perform the following functions:
- PROFINET IO device
- 100 Mbit/s full duplex
- Supports real-time classes of PROFINET IO:
- RT (Real-Time)
- IRT (Isochronous Real-Time), minimum send cycle 500 μs
- Connects to controls as PROFINET IO devices according to the PROFIdrive profile
- Standard TCP/IP communication for engineering processes using the STARTER commissioning tool
- Integrated 4-port switch with four RJ45 sockets based on the PROFINET ASIC ERTEC400. The optimum topology (line, star, tree) can therefore be configured without additional external switches.
SINAMICS Link
SINAMICS Link can be used to directly exchange data between several CU320-2 DP (PROFIBUS) or CU320-2 PN (PROFINET) Control Units without using a higher-level control system. In this case, the CBE20 Communication Board is required. Possible applications for the SINAMICS Link include:
- Torque distribution for several drives
- Setpoint cascading for several drives
- Load distribution for drives coupled through a material web
- Couplings between SINAMICS G or SINAMICS S with the CU320-2 Control Unit and SINAMICS DC Master with CUD Control Units.
Participants other than the CU320-2 Control Units or the CUD Control Units of the SINAMICS DC Master cannot be integrated into this communication network.
SINAMICS Link is activated by appropriately parameterizing the Control Units of the participants.
