Motor reactors

6SL3000-2AH41-1AA0

Заказной номер: 6SL3000-2AH41-1AA0

SINAMICS MOTOR REACTOR FOR MOTOR MODULES 1000KW, 3PH 500-690V

6SL3000-2AH41-3AA0

Заказной номер: 6SL3000-2AH41-3AA0

SINAMICS MOTOR REACTOR FOR MOTOR MODULE 1200KW, 3AC 500-690V

6SL3000-2AE41-4AA0

Заказной номер: 6SL3000-2AE41-4AA0

SINAMICS MOTOR REACTOR FOR MOTOR MODULE 710/800KW, 3AC 380-480V

6SL3000-2AH38-8AA0

Заказной номер: 6SL3000-2AH38-8AA0

Продукт больше не поставляется. Заменить продукт на 6SL3000-2AH41-0AA0

6SL3000-2AH35-8AA0

Заказной номер: 6SL3000-2AH35-8AA0

SINAMICS MOTOR REACTOR FOR СИЛОВОЙ МОДУЛЬ/MOTOR MODULE 560КВт, 3AC 500-690V

...

Обзор

Motor reactors reduce the voltage load on the motor windings by reducing the voltage gradients on the motor terminals generated when the converter is used. At the same time, the capacitive charge/discharge currents that place an additional load on the converter output when long motor cables are used are reduced. For group drives, output reactors should always be used. The maximum permissible output frequency when a motor reactor is used is150 Hz.

The motor reactor must be installed as close as possible to the Motor Module or Power Module. Up to 2 motor reactors can be connected in series.

Motor reactors are approved for use only in conjunction with Vector and V/f control modes.

For additional notes on the use of motor reactors, please refer to the SINAMICS Low Voltage Engineering Manual.

Технические данные

Обзор

Вы смотрели:

5WG1220-2AB21